Aerco SmartPlate User Manual download pdf (Page 26)

SmartPlate Installation, Operation & Maintenance Manual

CHAPTER 4 – ADJUSTMENT

Page 26 of 138 AERCO International, Inc.  100 Oritani Dr.  Blauvelt, NY 10913 OMM-0069_0E

PRI: 11/26/2013 Phone: 800-526-0288 SP-100

COVER

SCREWS (2)

HAND-WHEEL

Figure 4-1. Control Valve Electronics Module – Top View

2. Remove the Electronics Module cover from the Valve to access the internal components

shown in Figure 4-2

LED

AUTO-

STROKE

BUTTON

DIP SWITCHES

HAND-WHEEL

Figure 4-2. Control Valve with Electronics Module Cover Removed

NOTE

When external 120/240 VAC power is properly connected to the

ECS/SP Control Box, 24 VAC power is supplied to the MXG-461

Control Valve when the Control Box POWER switch is set to the

ON position. The POWER switch is located on the right side of the

Control Box.

3. Ensure that all three (3) DIP switches shown in Figure 4-2 are in the OFF (Down) position

as shown.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 137 138

No comments

Aerco SmartPlate User Manual Page 26